Chapter 72 - Iron and steel: Sri Lanka HS Codes 2026

Chapter 72Last updated May 5, 2026

Need the full duty breakdown for a specific code in this chapter?

HS Code	Description	Unit	ICL/SLSI	GEN	Cess	PAL	Excise	SCL	SSCL	VAT
72.01Pig iron and, Spiegeleisen in pigs, blocks or other primary forms.
7201.10	Non-alloy pig iron containing by weight 0.5% or less of phosphorus	kg	-	Free	-	10%	-	-	2.5%	18%
7201.20	Non-alloy pig iron containing by weight more than 0.5% of phosphorus	kg	-	Free	-	Ex	-	-	2.5%	18%
7201.50	Alloy pig iron; spiegeleisen	kg	-	Free	-	Ex	-	-	2.5%	18%
72.02Ferro-alloys.
7202.11	Containing by weight more than 2% of carbon	kg	-	Free	-	10%	-	-	2.5%	18%
7202.19	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.21	Containing by weight more than 55% of silicon	kg	-	Free	-	10%	-	-	2.5%	18%
7202.29	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.30	Ferro-silico-manganese	kg	-	Free	-	10%	-	-	2.5%	18%
7202.41	Containing by weight more than 4% of carbon	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.49	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7202.50	Ferro-silico-chromium	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.60	Ferro-nickel	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.70	Ferro-molybdenum	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.80	Ferro-tungsten and ferro-silico-tungsten	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.91	Ferro-titanium and ferro-silico-titanium	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.92	Ferro-vanadium	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.93	Ferro-niobium	kg	-	Free	-	Ex	-	-	2.5%	18%
7202.99	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
72.03Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms.
7203.10	Ferrous products obtained by direct reduction of iron ore	kg	-	Free	-	10%	-	-	2.5%	18%
7203.90	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
72.04Ferrous waste and scrap; remelting scrap ingots of iron or steel.
7204.10	Waste and scrap of cast iron	kg	L	Free	-	10%	-	-	2.5%	18%
7204.21	Of stainless steel	kg	L	Free	-	Ex	-	-	2.5%	18%
7204.29	Other	kg	L	Free	-	10%	-	-	2.5%	18%
7204.30	Waste and scrap of tinned iron or steel	kg	L	Free	-	10%	-	-	2.5%	18%
7204.41	Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles	kg	L	Free	-	10%	-	-	2.5%	18%
7204.49	Other	kg	L	Free	-	10%	-	-	2.5%	18%
7204.50	Remelting scrap ingots	kg	L	Free	-	Ex	-	-	2.5%	18%
72.05Granules and powders, of pig iron, spiegeleisen, iron or steel.
7205.10	Granules	kg	-	Free	-	10%	-	-	2.5%	18%
7205.21	Of alloy steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7205.29	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.06Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03).
7206.10	Ingots	kg	-	Free	-	Ex	-	-	2.5%	18%
7206.90	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
72.07Semi-finished products of iron or non- alloy steel.
7207.11	Of rectangular (including square) cross- section, the width measuring less than twice the thickness	-	-	-	-	-	-	-	-	-
7207.11.10	Billets	kg	-	Free	-	2.5%	-	-	2.5%	18%
7207.11.90	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7207.12	Other, of rectangular (other than square) cross-section	-	-	-	-	-	-	-	-	-
7207.12.10	Billets	kg	-	Free	-	Ex	-	-	2.5%	18%
7207.12.90	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7207.19	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7207.20	Containing by weight 0.25% or more of carbon	-	-	-	-	-	-	-	-	-
7207.20.10	Billets	kg	-	Free	-	Ex	-	-	2.5%	18%
7207.20.90	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
72.08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot- rolled, not clad, plated or coated.
7208.10	In coils, not further worked than hot-rolled, with patterns in relief	kg	-	Free	-	Ex	-	-	2.5%	18%
7208.25	Of a thickness of 4.75 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7208.26	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	Ex	-	-	2.5%	18%
7208.27	Of a thickness of less than 3 mm	kg	-	Free	-	5%	-	-	2.5%	18%
7208.36	Of a thickness exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.37	Of a thickness of 4.75 mm or more but not exceeding 10 mm	kg	-	Free	-	Ex	-	-	2.5%	18%
7208.38	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	Ex	-	-	2.5%	18%
7208.39	Of a thickness of less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.40	Not in coils, not further worked than hot- rolled, with patterns in relief	kg	-	Free	-	10%	-	-	2.5%	18%
7208.51	Of a thickness exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.52	Of a thickness of 4.75 mm or more but not exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.53	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.54	Of a thickness of less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7208.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.09Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold rolled (cold-reduced), not clad, plated or coated (+).
7209.15	Of a thickness of 3 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7209.16	Of a thickness exceeding 1 mm but less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.17	Of a thickness of 0.5 mm or more but not exceeding 1 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.18	Of a thickness of less than 0.5 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.25	Of a thickness of 3 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7209.26	Of a thickness exceeding 1 mm but less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.27	Of a thickness of 0.5 mm or more but not exceeding 1 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.28	Of a thickness of less than 0.5 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7209.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.10Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated .
7210.11	Of a thickness of 0.5 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7210.12	Of a thickness of less than 0.5 mm :	-	-	-	-	-	-	-	-	-
7210.12.10	Printed	kg	-	Free	-	10%	-	-	2.5%	18%
7210.12.20	Electrolytic tin plates for the manufacture of metal fittings for tea chests	kg	-	Free	-	10%	-	-	2.5%	18%
7210.12.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7210.20	Plated or coated with lead, including terne- plate	kg	-	Free	-	10%	-	-	2.5%	18%
7210.30	Electrolytically plated or coated with zinc	kg	-	Free	-	5%	-	-	2.5%	18%
7210.41	Corrugated	kg	-	20%	10%	10%	-	-	2.5%	18%
7210.49	Other :	-	-	-	-	-	-	-	-	-
7210.49.10	Flat sheets, of a thickness not exceeding 0.17 mm, in rolls / Flat sheets, of a thickness exceeding 0.17mm , in rolls	kg	-	Free	-	10%	-	-	2.5%	18%
7210.49.21	Galvanized and annealed (galvanealed)	kg	-	Free	-	10%	-	-	2.5%	18%
7210.49.22	Not further worked after hot dipping	kg	-	20%	-	10%	-	-	2.5%	18%
7210.49.29	Other	kg	-	20%	-	10%	-	-	2.5%	18%
7210.49.90	Other	kg	-	20%	5%	10%	-	-	2.5%	18%
7210.50	Plated or coated with chromium oxides or with chromium and chromium oxides	kg	-	Free	-	10%	-	-	2.5%	18%
7210.61	Plated or coated with aluminium-zinc alloys	kg	-	Free	-	10%	-	-	2.5%	18%
7210.69	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7210.70	Painted, varnished or coated with plastics	kg	-	Free	-	10%	-	-	2.5%	18%
7210.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.11Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.
7211.13	Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief	kg	-	Free	-	Ex	-	-	2.5%	18%
7211.14	Other, of a thickness of 4.75 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7211.19	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7211.23	Containing by weight less than 0.25% of carbon	kg	-	Free	-	10%	-	-	2.5%	18%
7211.29	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7211.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.12Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated .
7212.10	Plated or coated with tin :	-	-	-	-	-	-	-	-	-
7212.10.10	Electrolytic tin plate of a thickness not exceeding 0.22 mm	kg	-	Free	-	Ex	-	-	2.5%	18%
7212.10.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7212.20	Electrolytically plated or coated with zinc :	-	-	-	-	-	-	-	-	-
7212.20.10	Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 Mpa	kg	-	Free	-	10%	-	-	2.5%	18%
7212.20.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
7212.30	Otherwise plated or coated with zinc	kg	-	20% or Rs.35/= per kg	-	10%	-	-	2.5%	18%
7212.40	Painted, varnished or coated with plastics	kg	-	Free	-	5%	-	-	2.5%	18%
7212.50	Otherwise plated or coated :	-	-	-	-	-	-	-	-	-
7212.50.10	Plated or coated with chromium oxides or with chromium and chromium oxides	kg	-	Free	-	Ex	-	-	2.5%	18%
7212.50.90	Other	kg	-	10%	-	10%	-	-	2.5%	18%
7212.60	Clad	kg	-	Free	-	Ex	-	-	2.5%	18%
72.13Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
7213.10	Containing indentations, ribs, grooves or other deformations produced during the rolling process :	-	-	-	-	-	-	-	-	-
7213.10.10	Flattened circles and modified rectangles / Ribbed Steel Bars for the Reinforcement of Concrete	kg	S	20%	Rs.5/= per kg	Ex	-	-	2.5%	18%
7213.10.90	Other / Ribbed Steel Bars for the Reinforcement of Concrete	kg	S	20%	5% or Rs.13/= per kg	Ex	-	-	2.5%	18%
7213.20	Other, of free-cutting steel	kg	-	20%	Rs.5/= per kg	Ex	-	-	2.5%	18%
7213.91	Of circular cross-section measuring less than 14 mm in diameter	-	-	-	-	-	-	-	-	-
7213.91.10	Circular cross-section measuring less than 8 mm / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	Rs.5/= per kg	Rs.5/= per kg	5%	-	-	2.5%	18%
7213.91.90	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	Free	-	10%	-	-	2.5%	18%
7213.99	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	Free	-	10%	-	-	2.5%	18%
72.14Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.
7214.10	Forged :	-	-	-	-	-	-	-	-	-
7214.10.10	Flattened circles and modified rectangles / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	k	S	20%	Rs.5/= per kg	Ex	-	-	2.5%	18%
7214.10.90	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	20%	5% or Rs.20/= per kg	10%	-	-	2.5%	18%
7214.20	Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling :	-	-	-	-	-	-	-	-	-
7214.20.10	Flattened circles and modified rectangles	kg	-	20%	Rs.10/= per kg	10%	-	2.5%	-	18%
7214.20.90	Other / Ribbed Steel Bars for the Reinforcement of Concrete	kg	S	20%	5% or Rs.25/= per kg	10%	-	-	2.5%	18%
7214.30	Other, of free-cutting steel	kg	-	20%	Rs.5/= per kg	10%	-	-	2.5%	18%
7214.91	Of rectangular (other than square) cross- section :	-	-	-	-	-	-	-	-	-
7214.91.10	Flat bars of a width not exceeding 30 mm and thickness not exceeding 6 mm, containing by weight less than 0.25% of carbon / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	20%	5% or Rs.20/= per kg	Ex	-	-	2.5%	18%
7214.91.20	Other, containing by weight less than 0.25% of carbon, other than flat bars / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	20%	5% or Rs.20/= per kg	Ex	-	-	2.5%	18%
7214.91.90	Other / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	Rs.5/= per kg	Rs.5= per kg	10%	-	-	2.5%	18%
7214.99	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	20%	Rs.5/= per kg	10%	-	-	2.5%	18%
72.15Other bars and rods of iron or non-alloy steel .
7215.10	Of free-cutting steel, not further worked than cold-formed or cold-finished	kg	-	10%	-	10%	-	-	2.5%	18%
7215.50	Other, not further worked than cold-formed or cold-finished / Ribbed Steel Bars for the Reinforcement of Concrete / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	10%	-	10%	-	-	2.5%	18%
7215.90	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete	kg	S	10%	-	10%	-	-	2.5%	18%
72.16Angles, shapes and sections of iron or non-alloy steel (+).
7216.10	U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80 mm / Hot rolled structural steel sections i) U sections ii) L sections iii) T sections	kg	S	20%	Rs.5/= per kg	10%	-	-	2.5%	18%
7216.21	L sections / Hot rolled structural steel sections i) U sections ii) L sections iii) T sections	kg	S	20%	5% or Rs.20/= per kg	10%	-	-	2.5%	18%
7216.22	T sections / Hot rolled structural steel sections i) U sections ii) L sections iii) T sections	kg	S	20%	Rs.5/= per kg	10%	-	-	2.5%	18%
7216.31	U sections / Hot rolled structural steel sections i) U sections ii) L sections iii) T sections	kg	S	20%	-	10%	-	-	2.5%	18%
7216.32	I sections	kg	-	20%	-	10%	-	-	2.5%	18%
7216.33	H sections / L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of 80 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7216.40	L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of 80 mm or more	kg	-	15%	-	10%	-	2.5%	-	18%
7216.50	Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded / Hot rolled structural steel sections i) U sections ii) L sections iii) T sections	kg	S	10%	-	10%	-	-	2.5%	18%
7216.61	Obtained from flat-rolled products	kg	-	10%	-	10%	-	-	2.5%	18%
7216.69	Other	kg	-	10%	-	10%	-	-	2.5%	18%
7216.91	Cold-formed or cold-finished from flat-rolled products	kg	-	10%	-	10%	-	-	2.5%	18%
7216.99	Other	kg	-	10%	-	10%	-	-	2.5%	18%
72.17Wire of iron or non-alloy steel .
7217.10	Not plated or coated, whether or not polished / Mild Steel Wires	kg	S	10%	-	10%	-	-	2.5%	18%
7217.20	Plated or coated with zinc :	-	-	-	-	-	-	-	-	-
7217.20.10	Wire of a solid cross section in the shape of circles measuring less than 1.6 mm in diameter / Mild Steel Wires	kg	S	Free	-	10%	-	-	2.5%	18%
7217.20.20	Wire of a solid cross section in the shape of circles measuring 1.6 mm in diameter or more but not exceeding 4 mm / Mild Steel Wires / Cold drawn mild steel wire for manufacture of wire-nails	kg	S	20%	Rs.6/= per kg	10%	-	-	2.5%	18%
7217.20.90	Other / Mild Steel Wires / Cold drawn mild steel wire for manufacture of wire-nails	kg	S	20%	Rs.6/= per kg	10%	-	-	2.5%	18%
7217.30	Plated or coated with other base metals	kg	-	Free	-	10%	-	-	2.5%	18%
7217.90	Other	-	-	-	-	-	-	-	-	-
7217.90.10	Plated or coated with plastics	kg	-	10%	Rs.7/= per kg	10%	-	-	2.5%	18%
7217.90.90	Other	kg	-	10%	Rs.6/= per kg	10%	-	-	2.5%	18%
72.18Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.
7218.10	Ingots and other primary forms	kg	-	Free	-	Ex	-	-	2.5%	18%
7218.91	Of rectangular (other than square) cross- section	kg	-	Free	-	Ex	-	-	2.5%	18%
7218.99	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
72.19Flat-rolled products of stainless steel, of a width of 600 mm or more .
7219.11	Of a thickness exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.12	Of a thickness of 4.75 mm or more but not exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.13	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.14	Of a thickness of less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.21	Of a thickness exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.22	Of a thickness of 4.75 mm or more but not exceeding 10 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.23	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.24	Of a thickness of less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.31	Of a thickness of 4.75 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7219.32	Of a thickness of 3 mm or more but less than 4.75 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.33	Of a thickness exceeding 1 mm but less than 3 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.34	Of a thickness of 0.5 mm or more but not exceeding 1 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.35	Of a thickness of less than 0.5 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7219.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.20Flat-rolled products of stainless steel, of a width of less than 600 mm.
7220.11	Of a thickness of 4.75 mm or more	kg	-	Free	-	10%	-	-	2.5%	18%
7220.12	Of a thickness of less than 4.75 mm	kg	-	Free	-	10%	-	-	2.5%	18%
7220.20	Not further worked than cold-rolled (cold- reduced)	kg	-	Free	-	10%	-	-	2.5%	18%
7220.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.21Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.
7221.00.00	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.	kg	-	10%	-	Ex	-	-	2.5%	18%
72.22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.
7222.11	Of circular cross-section	kg	-	10%	-	Ex	-	-	2.5%	18%
7222.19	Other	kg	-	10%	-	10%	-	-	2.5%	18%
7222.20	Bars and rods, not further worked than cold- formed or cold-finished	kg	-	10%	-	10%	-	-	2.5%	18%
7222.30	Other bars and rods	kg	-	10%	-	10%	-	-	2.5%	18%
7222.40	Angles, shapes and sections	kg	-	10%	-	10%	-	-	2.5%	18%
72.23Wire of stainless steel
7223.00	Wire of stainless steel	kg	-	10%	-	10%	-	-	2.5%	18%
72.24Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.
7224.10	Ingots and other primary forms	kg	-	Free	-	Ex	-	-	2.5%	18%
7224.90	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.25Flat-rolled products of other alloy steel, of a width of 600 mm or more .
7225.11	Grain-oriented	kg	-	Free	-	\	-	-	2.5%	18%
7225.19	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7225.30	Other, not further worked than hot-rolled, in coils	kg	-	Free	-	Ex	-	-	2.5%	18%
7225.40	Other, not further worked than hot-rolled, not in coils	kg	-	Free	-	10%	-	-	2.5%	18%
7225.50	Other, not further worked than cold-rolled (cold-reduced)	kg	-	Free	-	Ex	-	-	2.5%	18%
7225.91	Electrolytically plated or coated with zinc	kg	-	Free	-	10%	-	-	2.5%	18%
7225.92	Otherwise plated or coated with zinc	kg	-	Free	-	5%	-	-	2.5%	18%
7225.99	Other	kg	-	Free	5% or Rs.18/= per kg	Ex	-	-	2.5%	18%
72.26Flat-rolled products of other alloy steel, of a width of less than 600 mm (+).
7226.11	Grain-oriented	kg	-	Free	-	10%	-	-	2.5%	18%
7226.19	Other	kg	-	Free	-	Ex	-	-	2.5%	18%
7226.20	Of high speed steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7226.91	Not further worked than hot-rolled	kg	-	Free	-	10%	-	-	2.5%	18%
7226.92	Not further worked than cold-rolled (cold- reduced)	kg	-	Free	-	Ex	-	-	2.5%	18%
7226.99	Other	kg	-	Free	-	10%	-	-	2.5%	18%
72.27Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
7227.10	Of high speed steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7227.20	Of silico-manganese steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7227.90	Other / Plain Steel Bars and Coils for the Reinforcement of Concrete / Hot Rolled Steel Bars for Structural and General Engineering Purposes i) Round Bars ii) Square Bars iii) Flats	kg	S	20%	-	5%	-	-	2.5%	18%
72.28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel .
7228.10	Bars and rods, of high speed steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7228.20	Bars and rods, of silico-manganese steel	kg	-	Free	-	Ex	-	-	2.5%	18%
7228.30	Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded	kg	-	Free	-	10%	-	-	2.5%	18%
7228.40	Other bars and rods, not further worked than forged	kg	-	10%	-	Ex	-	-	2.5%	18%
7228.50	Other bars and rods, not further worked than cold-formed or cold-finished	kg	-	10%	-	Ex	-	-	2.5%	18%
7228.60	Other bars and rods	kg	-	10%	-	10%	-	-	2.5%	18%
7228.70	Angles, shapes and sections	kg	-	Free	-	10%	-	-	2.5%	18%
7228.80	Hollow drill bars and rods	kg	-	10%	-	Ex	-	-	2.5%	18%
72.29Wire of other alloy steel.
7229.20	Of silico-manganese steel	kg	-	Free	-	10%	-	-	2.5%	18%
7229.90	Other	kg	-	10%	Rs.6/= per kg	10%	-	-	2.5%	18%

72.01Pig iron and, Spiegeleisen in pigs, blocks or other primary forms.

72.03Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms.

72.04Ferrous waste and scrap; remelting scrap ingots of iron or steel.

72.05Granules and powders, of pig iron, spiegeleisen, iron or steel.

72.06Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03).

72.07Semi-finished products of iron or non- alloy steel.

72.08Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot- rolled, not clad, plated or coated.

72.09Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold rolled (cold-reduced), not clad, plated or coated (+).

72.10Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated .

72.11Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.

72.12Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated .

72.13Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.

72.14Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.

72.15Other bars and rods of iron or non-alloy steel .

72.16Angles, shapes and sections of iron or non-alloy steel (+).

72.17Wire of iron or non-alloy steel .

72.18Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.

72.19Flat-rolled products of stainless steel, of a width of 600 mm or more .

72.20Flat-rolled products of stainless steel, of a width of less than 600 mm.

72.21Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.

72.22Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.

72.23Wire of stainless steel

72.24Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.

72.25Flat-rolled products of other alloy steel, of a width of 600 mm or more .

72.26Flat-rolled products of other alloy steel, of a width of less than 600 mm (+).

72.27Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.

72.28Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel .

72.29Wire of other alloy steel.